QUESTION: Is any MDF or paper pressed boards used in this product or is it all solid wood construction? by Megan B 7/23/2013
ANSWER: Sorry, I can't really tell by looking at it, but it's really a beautiful crib.... Hope this helps! by M I 8/29/2013
ANSWER: My husband put it together so I didn't pay attention to every piece but I'm pretty sure it's all real wood. I have really enjoyed it. I bought all 3 pieces from the set and the only complaint I have is the drawer messed up on the changing table dresser. But we were able to fix it. Good luck with your purchase. But I am happy with the product! by Maci C 7/24/2013
ANSWER: All solid wood! But the matching dresser does have paper pressed boards. by L A 7/24/2013
QUESTION: What goes under the mattress The picture shows the mattress pretty low and it seems uncomfortable when placing the baby and picking him up..
If you want the mattress higher, how would you do this? by sonya a 5/3/2013
STAFF ANSWER: In this photo, the mattress height is shown at it's lowest setting. The Babyletto Modo crib has 4 adjustable mattress heights from infant to toddler stage. by Customer S 5/8/2013
QUESTION: I need to know if I can use a bed-skirt with this crib? by None N 11/27/2012
ANSWER: When the mattress is in the highest position, the bed skirt works. As you lower the mattress, the skirt also lowers and hits the ground. by M T 12/6/2012
ANSWER: It does not work with this crib. I bought a cute one from pottery barn kids but as well have saved the money because you really can see it. by A H 11/29/2012
ANSWER: No. You cannot use a bed skirt with this crib. It doesn't fit well. by MARCELINA A 11/28/2012
ANSWER: You will not be able to use a bed skirt-as you would only be able to see it through the very bottom crack which is only a couple of inches from the ground. The look of the crib is very clean, modern, so it looks very nice without a skirt. by C I 11/28/2012
ANSWER: No, a bed skirt wouldn't work with this crib, but it's beautiful all on it's own and doesn't need it! by K A 11/28/2012
ANSWER: You really can't use a crib skirt on this crib. It really has a very nice look to it with the dark wood on the bottom, so need for a skirt.
It is an awesome crib, I have been so incredible happy with it!
All the best! by M E 11/28/2012
ANSWER: Not when the mattress is on the lowest level. When it is on the upper levels, probably, but I did not use one as it would have to go behind the bars. by S T 11/28/2012
ANSWER: Yes, you can. I believe it would be difficult for the model with the drawer below, but this one is fine. by T M 11/28/2012
ANSWER: Ours was already gathered at the bottom after lowering it for the first time : You can use one, but you'll just have to tuck the bottom under or pull it toward the middle under the mattress so it shows the bottom. by C I 11/28/2012
ANSWER: Yes but only when its at its highest setting for newborns but in my opinion it doesn't showcase the bedskirt nicely but it will fit. by L A 11/28/2012
ANSWER: yes, you may use a bed skirt with this crib until you move the mattress to its lowest position. by M L 11/28/2012
ANSWER: I used a bedskirt until he was standing and the mattress went all the way down as shown in this picture. The crib is open on the bottom so the bedskirt will go down to the floor. by C M 11/28/2012
ANSWER: You can use a bed skirt but will likely need to remove it once the bed is lowered by Mindy H 11/28/2012
ANSWER: I dont think so, but with that said I have not tried!
PS I love this crib, my son has slept so well in it. He has been in it since he was a day old.
I hope this helps
thank you Emer by E M 11/28/2012
QUESTION: Hello, is it easy to adjust the mattress to the different levels What is needed to do for that? by None N 9/24/2012
ANSWER: super super easy!! by K A 11/28/2012
ANSWER: Yes, it is very easy to adjust the position of the mattress. All you need is an Allen wrench. We really love this crib : by N I 9/26/2012
ANSWER: I think so! All you need is the hex key they provide for assembly. You unscrew screws in the four corners and move the mattress support down or up as needed and re-screw. This has been true of all the cribs I have assembled. by A M 9/26/2012
ANSWER: Hi there - Super easy! We just did this last night. All you need is an Allen Wrench and i'm pretty sure the crib came with one. If not, it is universal to almost all other furniture companies that give you an Allen Wrench for product assembly.
All the Best! by C M 9/26/2012
ANSWER: Yes, it's straightforward to adjust the mattress. The crib comes with the required wrench tool to undo/tighten the bolts in each corner of the mattress platform to adjust the height. Three different levels are possible. by M A 9/26/2012
ANSWER: It's pretty easy, especially with 2 people. Just four screws, you use the allen wrench that comes with the crib. by P A 9/26/2012
ANSWER: It is super easy- basic tools only are needed. by A S 9/26/2012
QUESTION: How well does the paint/finish stand up to scratching and biting Has anyone experienced chipping or visible scratching on this crib from a teething kid? by D R 8/11/2012
ANSWER: The crib paint/finish does chip due to biting but I still think it is a great crib! You will find imperfections to any crib.
All the best! by M E 9/8/2012
ANSWER: Unfortunately, not very well : Our daughter did some damage to the surface one morning before we got to her. Soon after, I purchased Lions Gate guards clear from Babies R Us and there has been no further damage. I know if I would have had them on it to begin with, there would have been no damage at all. by C I 8/19/2012
ANSWER: The paint did chip as a result of my teething daughter, but I doubt it's any more than any other crib would. You could probably buy a plastic guard to put on the top edge to keep it from happening. Otherwise the crib has held up great. I actually bought a second Modo crib when our #2 baby turned out to be twins! We are happy with both. by L D 8/17/2012
ANSWER: Cot is beautiful, sturdy and easy to put together. I did it by myself when 8 months pregnant!
However, it has become very chipped from my now 14 month old biting it when teething. This is fairly unavoidable though, I think and teething rails can be purchased.
Hope that helps. by P H 8/15/2012
ANSWER: On a side note- we realized that we will be soon replacing the chipped rail with the toddler rail, so it will look new again! by A S 8/14/2012
ANSWER: Unfortunately our crib is showing quite a bit of teething-related wear and tear- the inside of the top rail has quite a few spots that the paint has chipped off to reveal the natural wood color. That said- we have really loved everything else about the crib... we should have invested in protective rail covers earlier perhaps. by A S 8/14/2012
ANSWER: We bought 2 of these cribs for our twin daughter's, and like them very much. Having said that, the paint did chip and rub off in several places fairly quickly. Our girls do not chew on the crib yet that is, but the paint has come off from us leaning over the crib to put the girls down, probably from our belts/buttons or simply rubbing against them over time. I do wish the paint had lasted longer as the crib is fairly expensive, but since so many aspects of the crib are to my liking, I would still give this crib high marks. Also, since the paint comes off fairly easily, if I notice the babies teething on the crib, I will most likely attach a teething guard to the rail. I certainly do not want them getting paint chips in their mouths. by P A 8/14/2012
ANSWER: We purchased this for my Mom's house where my son naps Monday through Friday. 1 1/2 years later ours looks brand new. No chips, scratches. I will mention that although he leans and hangs on the edge, our son was never big into chewing on furniture. We have had it since our son was 8 months old. by J L 8/14/2012
ANSWER: Great question. My daughter scratched quite a bit of the paint off with her teeth. Thank goodness it's non-toxic. I don't know if other cribs would hold up any better. We mitigated the situation by wrapping the top of the crib with fabric. You can also get plastic pieces to cover it. We kept the fabric on there from about 9 months to 16 months, though I could have probably removed it a bit sooner. Now I just need to figure out how to touch up the paint : by T M 8/13/2012
QUESTION: what date would this ship or expect to arrive? by ashley n 1/31/2012
STAFF ANSWER: If in stock, this item will ship within 24-48 hours with an estimated 5-7 business days in transit time. by Customer S 1/31/2012